Carmanah G Series Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Carmanah G Series. Carmanah G Series 18 pages. Rrfb mast arm kit
Également pour Carmanah G Series : Manuel de démarrage rapide (16 pages), Manuel (11 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel de remplacement des portes d'armoires (10 pages), Manuel (9 pages), Manuel d'installation (14 pages), Manuel (10 pages), Manuel (10 pages), Manuel d'installation (18 pages)

4.6

Connect and Configure Radar Module

Plug the radar cable connector onto its mate on the Radar Detection PCBA within the Carmanah E, F or G

system. Turn the barrel firmly clockwise to lock the connectors together.

The radar module is configured from the factory to trigger an activation whenever an oncoming

vehicle is detected approaching at a speed of at least 5 mph (8 km/h).

Changes from the default settings are often unnecessary. Reasons for changing the radar's configuration include:

•

To change the duration the LEDs flash following the last vehicle activation

To change the detection speed limits (the minimum and maximum speeds that will trigger an activation)

•

To increase or decrease the sensitivity of the radar module

•

You've ordered the Advanced Statistics option and wish to configure data logging options or read traffic

statistics from the radar module

To configure the radar module for a less common application (e.g., a radar-activated minimum speed

•

sign)

If it is necessary to configure the radar module, see

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

Section 6.0 Radar Module Connection &

RADAR DETECTION KIT

Settings.

carmanah.com