Forms + Surfaces levele Manuel d'instructions d'installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Forms + Surfaces levele. Forms + Surfaces levele 7 pages. Elevator interiors with lightplane
Imprimer la pageLEVELe
ELEVATOR INTERIORS WITH LIGHTPLANE
®
31
Connect Ceiling Power Box to local power.
•
Remove the cover from the power box.
•
Insert the local power supply conduit into the
power box opening.
•
Secure the ground wire to the junction point.
•
Return the cover to the power box and secure
with provided screws.
•
Remove the backer from the factory-installed
VHB tape on the bottom of the power box,
and secure it to the cab ceiling.
T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com
© 2017 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
32
Base
Cleat
Base
Base
Facing
Support
SIDE VIEW
REAR
SIDE
Install Base Facing.
•
Complete the installation by installing the
bases.
•
Remove backer from VHB tape on Base
Supports.
•
The Base Facing will engage with the
previously installed Base Cleat. Center Base
Facing, aligning with end point markings.
•
Press firmly to secure Base Facing to VHB
tape on Base Supports.
INSTALLATION INSTRUCTIONS
page 7 of 7 | 10-16-17