Forms+Surfaces AXIS RECEPTACLE Instructions sur les pièces jointes - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions sur les pièces jointes pour {nom_de_la_catégorie} Forms+Surfaces AXIS RECEPTACLE. Forms+Surfaces AXIS RECEPTACLE 2 pages.
Imprimer la pageAXIS
RECEPTACLE
TM
STEP BY STEP
TO ATTACH TWO AXIS RECEPTACLES
Attach bottom attachment plate
• Insert 1/4"-20 x 1/2" Phillips bit pan
head screws (a) through receptacle
frame and bottom attachment plate
to secure bottom attachment plate to
receptacle.
• Use Philips head screwdriver to tighten
screws until snug.
T 800.451.0410 | www.forms-surfaces.com
© 2015 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
Both attachment plates secured
• Both attachment plates should now be
secured on the first receptacle and ready
to be attached to the second receptacle.
ATTACHMENT INSTRUCTIONS
Align and attach second receptacle
• Align top and bottom attachment plates
from the first receptacle with the slots in
the second receptacle.
• Secure attachments plates with 1/4"-20
x 1/2" Phillips bit pan head screws (a)
to second receptacle as in Step 2 and
Step 4.
• Use Philips head screwdriver to tighten
screws until snug.
page 2 of 2 | 09-17-15