Carmanah R820-G Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Carmanah R820-G. Carmanah R820-G 10 pages. Cabinet-based systems
Également pour Carmanah R820-G : Manuel de démarrage rapide (16 pages), Manuel (11 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel de remplacement des portes d'armoires (10 pages), Manuel (9 pages), Manuel (10 pages), Manuel d'installation (14 pages), Manuel (10 pages)

3.1

Removing AC Components

Live AC power will be present. Only qualified personnel should carry out the following retrofit.

1. Access the inside of the power cabinet and switch the circuit breaker to the off position. Isolate the AC

power at the source so it is no longer feeding the cabinet.

2. Remove Solar (spare fuse) and DC Power fuses from the fuse holders on right side of cabinet.

2. Remove the DC power wires (red and black) on the right side of the cabinet. Install the solar product label

above the previous label(s) on the user interface plate and on the outside of the cabinet. Ensure the

surface is cleaned with isopropyl alcohol and is dried before applying the labels. Cross out the AC power

ratings information on the label with a permanent marker.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

AC TO SOLAR RETROFIT GUIDE

carmanah.com