Carmanah SC315-G Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Carmanah SC315-G. Carmanah SC315-G 10 pages. Cabinet-based systems
Également pour Carmanah SC315-G : Manuel de démarrage rapide (16 pages), Manuel (11 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel de remplacement des portes d'armoires (10 pages), Manuel (9 pages), Manuel (10 pages), Manuel d'installation (14 pages), Manuel (10 pages)

Imprimer la page
Carmanah SC315-G Manuel
3.3
Legacy SC315 – Arch AC-DC Power Supply Replacement
Circuit
breaker
1. Access the inside of the power cabinet and switch the circuit breaker to the off position. It is also
recommended to disconnect the AC power source coming into the cabinet if possible.
2. Remove input and output wiring from the existing power supply and set aside to reuse.
3. Remove the two mounting screws and set aside, these will not be reused. Remove existing AC-DC power
supply.
4. The new power supply is smaller than the previous version, so the existing threaded PEM nuts will not be
able to be reused – new mounting holes must be drilled.
a. Drill two new holes in the mounting plate, using a #30 drill bit, to attach the new power supply and
use the provided 2x #4-40 screws and nuts to secure it in place. Do not drill through the rear of
the cabinet. Note the orientation of the power supply with the DC output facing up in the cabinet.
Either set of diagonal mounting holes may be used.
5. Reinstall the input (AC) and output (DC) wiring harnesses removed from step 2. Ensure the AC wiring is
terminated at the terminals labelled as AC/N (white wire) and AC/L (black wire).
6. Reconnect the AC power source and switch the circuit breaker to the on position in the cabinet. Once the
Energy Management System (EMS) has powered up you can test the system with the input method
installed, which typically would be a pedestrian push button for this system type.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
AC-DC POWER SUPPLY REPLACEMENT GUIDE
DC output
AC-DC power
supply
AC input
9
|
carmanah.com