Carmanah R820-G Manuel d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Carmanah R820-G. Carmanah R820-G 14 pages. Cabinet-based systems
Également pour Carmanah R820-G : Manuel de démarrage rapide (16 pages), Manuel (11 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel de remplacement des portes d'armoires (10 pages), Manuel (9 pages), Manuel (10 pages), Manuel (10 pages), Manuel (10 pages)

8. Ensure that the "Current Status" indicates "Online".

9. Ensure "Current Device Status" is "OK".

10. If the door switch sensor is installed, ensure that the "Cabinet Door" status reflects the current position of

the door. Open and close the door to change the switch state and confirm Glance reflects the change.

a. Door open = Open

b. Door closed = Closed

11. Contact Applied Information to arrange the firmware in the AI unit to be programmed correctly, if this

hasn't already been done.

c. Phone: 678.830.2170

d. Email:

e. Web:

appinfoinc.com

If testing indoors where there is no GPS signal, this may result in a device status of "No GPS

Lock".

R829 school zone application shown above.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com