Dreamer Design Verve SPT SPT Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dreamer Design Verve SPT SPT. Dreamer Design Verve SPT SPT 11 pages. Jogging stroller

Imprimer la page

m a i n t e n a n c e

We recommend that you have an experienced

dealer perform these maintenance checks once

a year. Lubrication of the following items is

necessary:

1 pivot point and cable of hand brake

2 hand brake cable by caliper lever

3 front wheel axle

4 quick release lever

5 insert in frame for rear wheels

Replace the brake pads when the grooves

become worn away. Check all bolts are tight

and springs are secure for rear foot brake.

Check fabric seams and straps for fraying or

tearing. Keep it out of the sun and in a dry

place, when not in use, to prevent fading and

mildew. Check the frame for loose rivets, cracks

and wear. Check to make sure all nuts and bolts

are tight on the frame.

To adjust the hand brake if it becomes loose, turn

the barrel towards you, away from the locking

ring. Tighten the locking ring to make a gap no

more than a 1/4" wide. If still too loose, adjust

barrel down by the brake calipers.

these adjustments should be done in small increments -

only a small amount of adjustment is necessary

locking ring

barrel

brake pad

locking ring

barrel