Carmanah SC315-G Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Carmanah SC315-G. Carmanah SC315-G 10 pages. Cabinet-based systems
Également pour Carmanah SC315-G : Manuel de démarrage rapide (16 pages), Manuel (11 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel de remplacement des portes d'armoires (10 pages), Manuel (9 pages), Manuel d'installation (14 pages), Manuel (10 pages), Manuel (10 pages)

3.1

Door Switch Kit Mounting Holes

Ensure the equipment is not powered during installation.

Ensure all metal chips are removed to prevent system damage caused by short circuits.

Recheck all wiring prior to energizing the system.

If you do not see the indentation marks below on the side of the cabinet you have an older G

Series/SpeedCheck cabinet. Contact Carmanah for location guidance. Some legacy cabinets

may not be suitable for this installation.

1. Access the inside of the cabinet and remove the solar and battery fuses or turn off the circuit breaker.

2. Use the indentation marks below to locate the drill holes.

3. Drill two 0.196" diameter holes as noted using a #9 ANSI drill bit.

4. Deburr the holes on the outside and inside to remove all aluminum chips.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

CABINET DOOR SWITCH RETROFIT GUIDE

carmanah.com