CommScope AMP NETCONNECT 2U Multi-Fiber Push-On Fiche d'instruction

Parcourez en ligne ou téléchargez le pdf Fiche d'instruction pour {nom_de_la_catégorie} CommScope AMP NETCONNECT 2U Multi-Fiber Push-On. CommScope AMP NETCONNECT 2U Multi-Fiber Push-On 4 pages. Mpo secure rack-mounted enclosure assembly

Imprimer la page

Blank Adapter Plate

(Shown Removed)

(Qty: 12)

Note: Mounting Hardware Included, Not Shown

1. INTRODUCTION

2U MPO Secure Rack-Mounted Enclosure Assembly

1553761-1 is used to house and manage MPO Secure

fiber optic connections. The enclosure fits into a

standard 483-mm [19.0-in.] Electronic Industries

Alliance (EIA) rack or cabinet.

Dimensions in this instruction sheet are in metric

NOTE

units [with U.S. customary units in brackets].

Figures are not drawn to scale.

To obtain information on AMP NETCONNECT

products, contact CommScope or visit our

website at www.commscope.com

2. DESCRIPTION

The enclosure consists of a chassis with a lid, 12 blank

adapter plates (with attaching hardware), 2 front

mounting brackets, 2 (right and left) rear mounting

brackets, and mounting hardware. The mounting

holes in the enclosure chassis provide a choice of two

positions when mounting the enclosure onto the rack

or cabinet. See Figure 1.

To obtain information on CommScope

products, visit our website at

www.commscope.com/SupportCenter

AMP NETCONNECT 2U Multi-Fiber

Push-On (MPO) Secure Rack-Mounted

Enclosure Assembly 1553761-1

Channel

(12 Places)

Mounting Holes

(Flush Position and

Protruding Position)

Figure 1

Lid (Do Not Remove, Shown Removed for Clarity)

Arrow and "TOP"

Marking

Chassis

Front Bracket

(Qty: 2)

The chassis features 12 channels for routing cable

and a rear brush. The rear brush is used to conceal

the inside of the chassis. Each channel is marked on

the front and back of the chassis to identify the

adapter plate it supports.

The enclosure accepts OM3 Hydra Kits 2193057-[ ],

SM Hydra Kits 2193758-[ ], and Cable Management

Adapter Plate Assembly 2111481-1. MPO adapter

plates are included with the hydra kits.

3. SAFETY PRECAUTIONS

To avoid personal injury, ALWAYS wear eye

DANGER

protection when working with optical fibers.

NEVER look into the end of terminated or

STOP

unterminated optical fibers. Laser radiation is

invisible, but can still damage eye tissue.

To avoid personal injury, NEVER use defective or

DANGER

damaged product. Punctured or stray laser

radiation may degrade system performance.

STOP

ALWAYS replace defective or damaged product

immediately.

— DO NOT remove the dust cap plug from a port

when the port is not in use.

This product is covered by one or more U.S.

patents or their foreign equivalents. For patents, see

www.commscope.com/ProductPatent/ProductPatent.aspx

Instruction Sheet

408-32067

FEB 2017 Rev B

Rear Brush

(Shown Removed)

Rear Bracket

(Qty: 2)

1 of 4