Carmanah E Series Manuel d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Carmanah E Series. Carmanah E Series 16 pages. Rrfb mast arm kit
Également pour Carmanah E Series : Manuel de démarrage rapide (20 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel d'installation (20 pages), Manuel de l'utilisateur (18 pages), Manuel de remplacement (9 pages), Manuel d'installation (18 pages)

4.4

Testing AI FCU

1. Ensure AI serial number has been activated.

2. For R920 or R820 systems set toggle switch to "OFF". In all other cases set to "AUTO".

3. Ensure connector is properly mated on the bottom of the AI FCU.

4. Confirm correct wiring and power-up system by connecting the battery fuse holders and turning on the AI

power switch.

5. On your PC, open a browser and navigate to the Glance website:

glance.appinfoinc.com

6. Log in using the credentials provided by AI or the distributor you purchased the equipment from.

7. On the upper left side of the browser, select the device name that matches the Device ID (the ID number

labelled on the AI FCU).

Ensure the equipment is not powering during installation. Recheck all wiring prior to energizing

the system.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com