CommScope 639849 Fiche d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Fiche d'instruction pour {nom_de_la_catégorie} CommScope 639849. CommScope 639849 5 pages. For wide panel antennas
Imprimer la page•
Loosen pivot screws . (do
not remove)
• Remove adjuster screws.
• Adjust antenna angle.
(use inclinometer)
• Reinstall adjuster screws.
• Retighten all screws.
•
Loosen pivot screws . (do
not remove)
• Remove adjuster screws.
• Adjust antenna angle.
(use inclinometer)
• Reinstall adjuster screws.
Middle Bracket First
• Retighten all screws.
www.commscope.com
© 2019 CommScope, Inc. All rights reserved.
Visit our website at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. 639849 D (08/19)
A
M10 pivot screw
(loosen only)
A
use inclinometer to
adjust antenna angle
M10 pivot screw
(loosen only)
Adjusting Antenna Tilt - 2 POINT MOUNT
M10 pivot screw
(loosen only)
A
use inclinometer to
adjust antenna angle
M10 pivot screw
(loosen only)
Adjusting Antenna Tilt - 3 POINT MOUNT
M10 pivot screw
(loosen only)
M10 pivot screw
center location
(loosen only)
DETAIL A
M10 pivot screw
center location
(loosen only)
M10 pivot screw
(loosen only)
M8 adjuster screw
perimeter location
(remove to adjust tilt)
DETAIL A
M8 adjuster screw
perimeter location
(remove to adjust tilt)
M10 pivot screw
(loosen only)
MAXIMUM TORQUE
M8
15N.m (11ft.lbs)
M10
37N.m (27ft.lbs)
M12
58N.m (43ft.lbs)
M10 pivot screw
(loosen only)
MAXIMUM TORQUE
M8
15N.m (11ft.lbs)
M10
37N.m (27ft.lbs)
M12
58N.m (43ft.lbs)
639849
Page 4 of 5