Carmanah R829-E Manuel d'installation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Carmanah R829-E. Carmanah R829-E 20 pages. Traffic beacon
Également pour Carmanah R829-E : Manuel de démarrage rapide (20 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages)

• F Series: use the indentation to locate the tip of the drill bit.

• E Series: on the top of the enclosure, mark a point 1.13" from the back and 1.50"

from the side as shown.

• Drill a ½" hole on top of the enclosure.

• Deburr hole and remove all aluminum chips.

1.5"

1.13"

Ensure all metal chips are removed

to prevent system damage caused

by short circuits.

Ensure that no burrs are present

that would interfere with the

antenna seal.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com

APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE

Drill Hole for Antenna

Ensure equipment is not powered

during installation and wiring of

the system. Recheck all completed

wiring for proper polarity prior to

energizing the system.

E/F Series

Page 15