Carmanah E Series Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Carmanah E Series. Carmanah E Series 20 pages. Rrfb mast arm kit
Également pour Carmanah E Series : Manuel de démarrage rapide (20 pages), Manuel d'installation (16 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel de l'utilisateur (18 pages), Manuel de remplacement (9 pages), Manuel d'installation (18 pages)

Imprimer la page
Carmanah E Series Manuel d'installation
• Obtain 3" of red and 3" of black wire supplied with the kit.
• Strip ends of both wires 0.35".
• Use small flat bladed screwdriver to depress each terminal button and insert the wire into the terminal.
7
• Install one end of the red wire into the left BAT+ terminal.
• Install one end of the black wire into the right BAT− terminal.
• Insert the other end of each wire into two of the 5-position splice terminals.
• Route the two red battery harness wires into the
splice terminal with the red wire from BAT+.
8
• Route the two black battery harness wires into the
splice terminal with the black wire from BAT−.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
Install Battery Jumper Wires and Splice Terminals
Make sure all wire strands go into the terminal hole.
APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE
Red
wires
E/F Series
Black
wires
Page 10