DreamGEAR Wii DGWII-1283 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} DreamGEAR Wii DGWII-1283. DreamGEAR Wii DGWII-1283 2 pages. 2 in 1 bundle quick shot plus racing wheel
User's Guide
PACKAGE CONTENTS:
• Racing Wheel PLUS
• Quick Shot PLUS
• User's Guide/Warranty Card
• Registration Card
NOTE: The Racing Wheel PLUS and Quick Shot PLUS are not compatible
with the Wii Remote Jacket. Be sure to remove the Wii Remote Jacket
before attempting to install.
RACING WHEEL PLUS
How to Install the Wii Remote into the Racing Wheel PLUS with
Wii MotionPLUS:
1. Open the latch located on the front of the Racing Wheel PLUS.
2. Insert the wrist strap attached to the Wii Remote through the hole on the
Racing Wheel PLUS and pull through.
3. Place the Wii Remote with Wii MotionPLUS into the wheel so that the
directional button is located on the left side of the wheel.
4. Close the latch to secure the Wii Remote into the Racing Wheel PLUS.
NOTE: Use the pass-through port on the Racing Wheel PLUS to navigate
through any menus.
How to Install the Wii Remote into the Racing Wheel PLUS without
Wii MotionPLUS:
1. Open the latch located on the front of the Racing Wheel PLUS.
2. Insert the wrist strap attached to the Wii Remote through the hole on the
Racing Wheel PLUS and pull through.
3. Place the Wii Remote into the wheel so that the directional button is
located on the left side of the wheel.
NOTE: Make sure that the Wii Remote is pushed all the way to the left side
of the Racing Wheel PLUS.
4. Close the latch to secure the Wii Remote into the Racing Wheel PLUS.
NOTE: Use the pass-through port on the Racing Wheel PLUS to navigate
through any menus.
QUICK SHOT PLUS
Battery Installation:
1. Unscrew the battery compartment door (located on the bottom of the
Quick Shot PLUS handle) using a mini-screw-driver (not included).
2. Insert 2 "AAA" batteries in the correct +/- direction and close the battery
compartment door.
3. Screw the battery compartment door shut tightly before using.
NOTE: The power switch next to the battery compartment turns the LED &
Rumble functions of the Quick Shot PLUS ON and OFF.
Installing the Wii Remote without Wii MotionPLUS:
1. Open both latches located at the top of the Quick Shot PLUS.
2. Insert the Wii Remote into the Quick Shot PLUS by sliding it into the Wii
Remote cradle of the Quick Shot PLUS (directional pad end first with the
buttons facing upward).
3. Slide the directional pad end of the Wii Remote towards the front of the
Quick Shot PLUS until it stops.
4. Close the latch that is closest to the "A" button on the Wii Remote. If you
are playing a game that does not require the Nunchuk, close the second
latch and you are ready to play. If your game requires the use of the
Nunchuk, continue to step 5.
5. Through the back opening of the Quick Shot PLUS, slip the connector
plug of the Wii Nunchuk under the back latch on the Quick Shot PLUS
and connect the Wii Nunchuk to the Wii Remote. Make sure that the
connector cover of the Wii Remote has been removed before inserting
the connector plug of the Wii Nunchuk into the External Extension
Connector of the Wii Remote.
6. Close the back latch.
Installing the Wii Remote with Wii MotionPLUS:
1. Open both latches located at the top of the Quick Shot PLUS.
2. Insert the Wii Remote into the Quick Shot PLUS by sliding it into the Wii
Remote cradle of the Quick Shot PLUS (directional pad end first with the
buttons facing upward).
3. Slide the directional pad end of the Wii Remote towards the front of the
Quick Shot PLUS until it stops.
4. Close the latches on the Quick Shot PLUS. If you are playing a game
that does not require the Nunchuk, you are ready to play. If your game
requires the use of the Nunchuk, continue to step 5.
5. Make sure the connector cover of the Wii MotionPLUS has been
removed and insert the connector plug of the Nunchuk into the External
Extension Connector of the Wii MotionPLUS.
NOTE: The bottom trigger of the Quick Shot PLUS activates the A button,
the top trigger activates the B button. Please refer to your game's User's
Guide for button configuration.
How to Remove the Wii Remote:
1. If the Nunchuk is attached to the Wii Remote or the Wii MotionPLUS,
remove the Nunchuk first before trying to remove the Wii Remote from
the Quick Shot PLUS.
NOTE: Please refer to the Wii Remote's User's Guide for Nunchuk removal
instructions.
2. Open both latches located on the top of the Quick Shot PLUS and lift
the Wii Remote up from the back and slide the Wii Remote until it is
completely out of the Quick Shot PLUS.
PLEASE CONTACT: 1-877-999-DREAM
FOR TECHNICAL SUPPORT