Carmanah Go Power! Solar Flex GP-FLEX-30 Manuel du propriétaire - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Carmanah Go Power! Solar Flex GP-FLEX-30. Carmanah Go Power! Solar Flex GP-FLEX-30 8 pages. Solar charging kit

Imprimer la page

7.3 Additional Information

Unless approved by Go Power! management, all product shipped collect to Go Power! will be refused. Test items or items that are not under warranty,

or units that are not defective, will be charged a minimum bench charge of ($50.00 US) plus taxes and shipping. A 15% restocking charge will be

applied on goods returned and accepted as "new" stock.

7.4 Out of Warranty Items

Go Power! electronic products are non-repairable, Go Power! does not perform repairs on its products nor does it contract out those repairs to a

third party. Go Power! does not supply schematics or replacement parts for any of its electronic products.

8.0 Diagram:

MC4 Power Cabels For Solar Flex Kits

Female (negative) MC4

Junction Box Connection

Negative MC4

Cable Conductor

Cut 50' wire in half to

make two 25' cables

Male (positive) MC4

Junction Box Connection

The MC4 power cable is usually the final connection between the solar array and

the solar controller. If it has not already been done, cut the MC power cable into two

pieces so that there is a positive conductor cable and negative conductor cable.

1. Cover the solar module(s) with an opaque material. Attach the appropriate MC4

power cable conductor to the positive and negative connectors of the MC4 junction

box. If you have more than one module, refer to the specific diagram for wiring a

parallel MC4 connection.

Positive MC4

2. Run the positive and negative MC4 cable conductors from the solar array to the

Cable Conductor

solar controller. Attach a positive polarity label to the end of the positive conductor.

If the positive conductor needs to be shortened and the polarity label is removed,

remember to re-label it as both positive and negative

conductors look exactly the same. Leave a few feet of cable at the solar

controller in case of future adjustment.

Note:

electric.com

solar module junction box and MC4 cables many not be exactly as shown.

GP-FLEX-30