Advanced Keys AK-104 Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Advanced Keys AK-104. Advanced Keys AK-104 11 pages. Smart keyless entry system

Imprimer la page
MAIN HARNESS WIRING DESCRIPTIONS
Wiring Description:
Brown
OUTPUT
Connect to the negative side of the trunk release trigger. This output will provide 1 second pulse
when UNLOCK button is pressed for 2 seconds. (This function is disabled when ACC input is ON)
Grey
OUTPUT
Connect to the positive side of parking lights or the hazard light switch for same effect.
Red
OUTPUT
Connect to a +12v source. Ensure that the OEM source wire used is fused for more than 15A.
Note:
When no suitable +12V source available (where current capacity is less than 15A) use
Green
OUTPUT
Connect this output directly to the negative-triggered door
Blue
OUTPUT
Connect this output directly to a negative-triggered door
Note:
This system outputs a single unlock pulse by default. Jumper
pulses output option for vehicles that require a two consecutive unlock-pulse to unlock/disarm or to
bypass the Driver Door Priority Unlock function to unlock all doors.
Black
OUTPUT
Connected to bare, unpainted metal on chassis. It is recommended to use a factory ground bolt
rather than a self-tapping screw. Screws tend to get loose or rusted over time and lead to erratic
electrical problems.
Purple
OUTPUT
Connect to the negative side of horn for audio notification.
Note:
This system is programmed for muted Lock/Unlock
operation by default. If audio notification is desired for arming
and disarming; connect Horn Control output to a siren* and
change the jumper setting
(Refer to Horn or Siren Mode in Programmable Features).
If siren control is a positive type or require more than
Note:
500mA to operate; add a relay according to the diagram on
the right to convert output to a positive type.
4
© Copyright Advanced Keys Inc. 2011. All Rights Reserved.
̶
500mA Trunk Release
+
7.5A
Parking Light x2
+
15A
Battery +12V
̶
15A
Lock
̶
15A
Unlock
̶
15A
Ground
̶
500mA Horn Control
(JP4)
to Siren Output option
Brown
Grey
7.5A
Grey
7.5A
Red
15A
Green
15A
Blue
15A
Black
Purple
JP4
lock
signal wire.
JP3
unlock
signal wire.
(JP3)
JP4
Negative (-) to Positive (+)
Output Conversion
Horn
Control
Output
(-)
+12V
Trunk Release
-
Parking Light
+
Parking Light
+
Battery +12V
+
Lock
-
Unlock
JP3
-
Ground
-
Horn Control
-
provides a double unlock
85
87
NO
30
COM
NC
86
87A
*Siren not included