Andea Electronics RL865 Manuel de l'utilisateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Andea Electronics RL865. Andea Electronics RL865 18 pages. Micro-power multi-protocol reader
Imprimer la page
⚫
ISO14443B
1) AFI: 00-FF.Note: 00 means not to enable.
2) Slot Number: 1,2,4,8,16.
4.2.5. System Work Mode
Figure 12 Configuration interface for system work mode
⚫
Mode:
1) Host mode: the host software needs to send commands.
2) Scan mode: the inventory can be automatically completed, even if the host
software does not send commands; scan setting in the scan mode should be
configured in advance.
⚫
Scan Mode Configuration:
1) Filtered time of duplicated tag(sec): the tag can only be counted again after
leaving the specified time.
2) Port of data output: Uart1 output, USBHID output, virtual keyboard output,
Wiegand 26, Wiegand 34.
3) Scan option
① Output UID: output the tag UID.
② Output block's data: output the content of the data block (not including the
security status byte).
Guangzhou Andea Electronics Technology Co., Ltd.
http://www.gzandea.com
User manual
9/15