Carmanah R820-G Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Carmanah R820-G. Carmanah R820-G 10 pages. Cabinet-based systems
Également pour Carmanah R820-G : Manuel de démarrage rapide (16 pages), Manuel (11 pages), Manuel de remplacement du système de gestion de l'énergie (12 pages), Manuel de remplacement des portes d'armoires (10 pages), Manuel (9 pages), Manuel d'installation (14 pages), Manuel (10 pages), Manuel (10 pages)

2.0 System Components

The retrofit kit includes:

Door switch and harness (1)

•

Standoffs (2)

•

Cap screws, pin-in hex, #10-32 (2)

•

Cap screws, Phillips pan head, #10-32 (2)

•

Washer, flat, #10 (4)

•

Washer, lock, #10 (2)

Cable ties (4)

•

Cable tie bases (2)

•

This guide is for installing the cabinet door switch retrofit kit into one of the following compatible Carmanah

systems:

•

G Series – SC315-G, R820-G, R247-G, R829-G

This retrofit is for systems that contain an Applied Information (AI) remote monitoring solution.

Refer to the individual product user manual for more details at support.carmanah.com. There are many different

options available for the G Series cabinet so your product may look different than shown throughout this guide.

The cabinet door switch retrofit kit is intended to be installed into an existing Applied Information (AI) installation

for monitoring the cabinet door position status using the Glance portal.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

CABINET DOOR SWITCH RETROFIT GUIDE

carmanah.com