ATI Technologies ADA208XLR Manuel d'utilisation et d'entretien - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} ATI Technologies ADA208XLR. ATI Technologies ADA208XLR 9 pages.
Imprimer la page
PRODUCT SPECIFICATIONS
OUTPUT LEVEL: +22dBm peak into 600 ohm balanced load, +18dBm peak, typical, into
unbalanced loads
DISTORTION: THD .10% maximum, 20 to 20,000Hz at peak output, IMD .05% maximum,
SMPTE measurement
SLEW RATE: 13 Volts per microsecond
RESPONSE: ± .25dB, 20 to 20,000Hz
NOISE: -95dBm out at maximum gain, 20kHz bandwidth
GAIN: 40dB maximum
CROSSTALK: 70dB minimum at 10kHz, any path
OUTPUT ISOLATION: 70 dB minimum at 1kHz. A shorted output does not affect any
other output.
OUTPUTS: Active balanced, servo controlled, ground sensing, 50 Ohm output impedance,
DC coupled. XLR type male connectors, Pin 2-HI, 3-LO, 1-GND.
INPUTS: 20Kohm active balanced, split and RF bypassed. +22dBm maximum input level,
60dB CMR at 60Hz. XLR type female connectors, Pin 2-HI, 3-LO, 1-GND.
POWER: 85-264 VAC ±1%, Output Voltage 24 VDC, Ouput Power 15 W, 47 - 63Hz
frequency range.
SIZE: 19" (48.3cm) W X 1.75" (4.45cm) H X 7.5" (19cm) D
www.atiaudio.com
7209 Browing Road
DaySequerra
Pennsauken, NJ 08109
www.atiaudio.com