Carmanah SPEEDCHECK Manuel de remplacement - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de remplacement pour {nom_de_la_catégorie} Carmanah SPEEDCHECK. Carmanah SPEEDCHECK 11 pages. For the solar-powered speedcheck-15/18 radar speed signs
Également pour Carmanah SPEEDCHECK : Manuel de remplacement (10 pages), Manuel de remplacement (10 pages)

Imprimer la page

4.6

Installing Polycarbonate Window

Observe antistatic handling precautions when working with the polycarbonate window removed.

Do not adjust any of the wiring or handle components on the circuit board.

Handle the polycarbonate window with care after the protective film has been removed to

preventive unwanted scratches or damage to the surface.

1. Install the polycarbonate window onto the foam gasket of the display assembly with the protective glossy

side/counter sunk holes facing up.

2. Secure the window with the two screws removed from

for now.

4.7

Installing Static Sign

The static signs come in various sizes, configurations and colors.

1. Install the top rail drip shield onto the new sign as shown below.

2. Secure the top rail with the four nuts from

3. Remove the protective film from the polycarbonate window if replaced in

4.8

Display Enclosure Reassembly

1. Carefully slide the display assembly up into the top rail.

2. Adjust display assembly until all holes are lined up with the static sign threaded inserts.

3. Secure the assembly with the six security screws from

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

WINDOW AND STATIC SIGN REPLACEMENT GUIDE

Section

4.5. Leave the window protective film on

Section

4.4.

Section

4.3.

[email protected]

Section

4.6.

carmanah.com