Advanced Keys AK-PSB05 Manuel d'installation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Advanced Keys AK-PSB05. Advanced Keys AK-PSB05 15 pages. Push-start ignition system

Imprimer la page

CLOSING UP

• Connecting the wire harnesses and power ON the controller, check and confirm system operations

(Refer to Ignition Test and Troubleshooting) verify functions of the vehicle are in working order.

• Make sure all wiring connection are insulated properly. Place and secure control units to locations

inside trim panels and bundle all lose wiring. Put back all trim panels

• When mounting the controller unit in the vehicle, consider the location carefully. You should make

sure that you avoid any location where the controller is exposed to moisture, extreme heat or

interfere with moving parts on the vehicle which hampers driving.

• Explain all functions related to the end-user of this system.

REFERENCES INFORMATION

PRODUCT SPECIFICATIONS

PRODUCT REGISTRATION

Installer of this system to is requested to fill out the following information as a proof of installation to

the end-user of this system. For manufacture warranty to take immediate effect please request the

end-user to update the following information at: http://www.advancedkeys.com/registration.htm

Company / Installer Name:

Installer Address:

Vehicle Manufacture:

Interface/Bypass Module Used:

If YES specify bypass make/model/firmware version:

System Ignition Mode:

Tach

System Enabled by:

Smart Key

Reviewed Product Operation with End-User:

Additional Comments:

Model:

YES

Steering Column Lock Bypassed:

If YES specify bypass method used:

Remote Start Function Enabled:

Tachless

If YES is Neutral Safety Switch tested and working?

Third Part Device

YES

≤ 20mA @ 12 VDC

≤ 80mA@12VDC

Phone Number:

Date of Installation:

Year:

Tested and Working

Not Tested

16 VDC

-25°C +85°C

YES