Dreamland LUXURY F2013 Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Dreamland LUXURY F2013. Dreamland LUXURY F2013 12 pages. Heated throw
Imprimer la page
Your Dreamland Intelliheat throw is designed to FAST PREHEAT and it also responds to temperature
changes in use.
The digital intelliheat control has 6 temperature settings (Diagram [C] page I).
WARNING! This appliance is only to be used with the control
unit supplied with it. The reference of the control unit is
specified on the label sewn onto the appliance.
WARNING! DO NOT place the control unit under the pillow or
under the sheets when in use.
WARNING! When using the throw never position the control
unit or the cable over or under the throw. Never cover the
control unit with the electric throw.
Connect the control connector into the throw socket then plug into the mains socket (Diagram [A]).
Switch on your Intelliheat throw from the back of the control (Diagram [C] (11)), by positioning the switch
ON (I). The temperature setting (Diagram [C] (4)) will default to the last one used, providing it has been set
to that number for a period longer than 5 minutes.
WHEN USING YOUR THROW, PRESS THE READY TO RELAX FAST PRE-HEAT BUTTON, THEN
AFTER 5 MINUTES, WHEN YOU ARE READY TO SETTLE DOWN, SELECT A SETTING FROM 1 TO
5 TO FIND YOUR PREFERRED CONTINUOUS USE TEMPERATURE.
READY TO RELAX FAST PREHEAT: Press the Ready to relax, fast pre-heat button on the front of the
control (8) (Diagram [C]). The ready to relax icon will be illuminated in red (Diagram [C] (5)) on your LED
Display. Your throw will be lovely and warm in just 5 minutes.
TO SET FOR CONTINUOUS USE: RELEASE the Ready to relax fast pre-heat button, and press the
temperature button (9) (Diagram [C]) to select your preferred temperature setting from 1-5. This will be
illuminated in orange on the (3) LED display (Diagram [C] (4)).
1 OR 9 HOURS AUTO SHUT OFF TIMER: The Intelliheat control has an AUTOMATIC SHUT OFF TIMER.
To set the timer, press the timer button (7) (Diagram [C]) and select either 1h or 9h. This will be illuminated
in green on the (3) LED Display (6) (Diagram [C]).
TIMER OFF/STANDBY: When the set time period has elapsed, the throw will automatically switch off and
the standby light will be illuminated in blue on the (3) LED display (10) (Diagram [C]). If you wish to switch
your throw back on again, press the timer button (7) (Diagram [C]) selecting either 1 or 9 hours.
MANUAL SWITCH OFF THE THROW: Switch off the back of your Intelliheat control (11) (Diagram [C])
to off (O) position.
MEMORY FUNCTION: After using your throw for more than 5 minutes, the Intelliheat control will remember
your last temperature setting.
DISCONNECT: To disconnect your throw from the mains socket, switch the control to OFF position on the
back of your Intelliheat control (O) (11) (Diagram [C]), and then safely disconnect the plug from the mains
socket.
EN
5