Communications Specialists R-1000 Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Communications Specialists R-1000. Communications Specialists R-1000 12 pages. R-1000 telemetry receiver operating manual
Imprimer la page2. To add the channel back to your scan list press [MEMO], the channel
number and [ENT] or use [] or [] or (DIAL) to scroll through
the memory channels. Passed frequencies will display a small "p" in
front of the frequency. Press [PASS] to cancel the pass feature and the
frequency will be returned to your scan list.
MODIFY NUMBER OF CHANNELS
You may notice, while scrolling through the memory bank, a slight delay
after the last channel before it returns to the first channel. This is due to
the receiver scanning all 999 channels before returning to channel 001. If
you only use the receiver to monitor a few frequencies, you may choose to
modify the number of channels
1. To limit number of channels to 99 press and hold [1] while turning on
power, to limit channels to 199 press and hold [2] while turning on
power, to limit channels to 299 press and hold [3] etc.
2. To return to 999 channels press and hold [0] while turning on power.
KEYGUARD LOCK
The keyguard lock feature allows you to lock the keypad. While in the
keyguard mode the only keys on the keypad that can be used are the []
[] keys. (DIAL) (GAIN) and (PWR/VOL) knobs operate normally.
1. To activate keyguard mode, press and hold [MEMO] for 5 seconds.
2. To cancel keyguard press and hold [MEMO] for 5 seconds.
PROGRAMMING MENU
You can customize your receiver by changing the default settings in the
programming menu.
1. To access menu, press and hold [ENT] for 5 seconds.
2. Move the cursor with [] or [] to select menu option.
3. Rotate (DIAL) to:
Change scan dwell time from 1 to 30 seconds in 1 second steps.
Change steps to .1kHz, .2kHz, .5kHz, 1.0kHz.
Select beep tone on or off.
4. Press [ENT] when finished.
6