Bosch PSR 1200 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Bosch PSR 1200. Bosch PSR 1200 13 pages. Battery-powered screwdriver
Également pour Bosch PSR 1200 : Manuel d'instructions original (7 pages), Manuel d'instructions original (12 pages)

Imprimer la page

2 609 140 210 - Buch Seite 3 Montag, 18. November 2002 8:07 08

Changing the Rotational Direction

Operate

the

rotational

switch 3 only at a standstill.

The rotational direction

switch 3 changes the di-

rectional rotation of the

machine. However, this is

not possible if the On/Off

switch 4 is being pressed.

Right Rotation (

)

Turn the rotational direction switch through to the

left stop (normal operation: drilling, driving in

screws, etc).

Left Rotation (

)

Press the rotational direction switch to the right

as far as it will go (loosening or unscrewing of

screws and nuts).

Setting the Torque

Carry out a practical test to determine with which

one of the 5 settings of the torque setting ring 1

the screws are driven flush into the material.

Low setting, e. g., small screws, soft

materials.

High setting, e. g., large screws, hard

materials.

With the correct setting, the clutch disengages as

soon as the screw is driven flush into the material

or the set torque is reached. Select a higher set-

ting when driving out screws, or set to the "Drill-

ing" symbol. The correct setting is to be deter-

mined by practical testing.

Drilling

Set the torque setting ring 1 to the "Drill-

ing" symbol.

Replacing the Chuck

For machines without a drill spindle locking facil-

ity, the chuck must be changed by an authorized

customer service facility for Bosch power tools.

The chuck must be tightened with a

starting torque of approx. 30 – 40 Nm.

5 • 2 609 140 210 • TMS • 13.11.02

Tips

direction

It is advisable to drill a pilot hole first before at-

tempting to screw in large, long screws into

hard materials.

Maintenance and Cleaning

Before any work on the machine itself, re-

move the battery.

For safe and proper working, always keep

the machine and the ventilation slots clean.

Should the machine fail in spite of careful manu-

facturing and testing, its repair should be carried

out by a Bosch power tools authorized service

agent.

For all correspondence and spare parts orders,

always include the 10-digit part number of the

machine!

Environmental Protection

Recycle raw materials instead of disposing

them as waste

The machine, its accessories and packaging ma-

terials should be sorted for environmentally-

friendly recycling.

These instructions are printed on chlorine-free re-

cycled paper.

The plastic components are labeled for catego-

rized recycling.

Defective or worn-out batteries must be recycled

according to the 91/157/EEC guideline.

English - 3

Nickel-cadmium-battery:

If your product is equipped

with a nickel-cadmium-bat-

tery, the battery must be

collected, recycled or dis-

posed of in an environmen-

tally-friendly way.