Electrolux CFI 105 Manuel d'utilisation et d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Electrolux CFI 105. Electrolux CFI 105 4 pages. Chest freezer
Imprimer la page
Make sure that the power plug is not squashed or damaged by the back of the fridge/freezer.
- A damaged power plug may overheat and cause a fire.
Do not place heavy articles or the fridge/freezer itself on the power cord.
- There is a risk of a short circuit and fire.
Do not remove the power cord by pulling on its lead, particularly when the fridge/freezer is being pulled out of its niche.
- Damage to the cord may cause a short-circuit, fire and/or electric shock.
- If the power cord is damaged, it must be replaced by a certified service agent or qualified service personnel.
If the power plug socket is loose, do not insert the power plug.
- There is a risk of electric shock or fire.
REFRIGERANT
Your appliance contains an environmental friendly gas called isobutane (R600a) as refrigerant which is nevertheless flammable. During trans-
portation and installation of the appliance, be sure that none of the components of the cooling circuit become damaged. If any part of the cool-
ing circuit damaged: avoid naked flames and sources of ignition; thoroughly ventilate the room in which the appliance is installed.
DISPOSAL
Appliance Packaging Information All materials are environmentally sound! They can be dumped or burned at an incinerating plant without danger!
About the materials: The plastics can be recycled and are identified as follows:
>PE< for polyethylene, e.g. the outer covering and the bags in the interior.
>PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluorocarbon.
The carton parts are made from recycled paper and should be disposed of at a waste-paper recycling collection location. Disposal of old
Appliances For environmental reasons, refrigaration appliances must be disposed of properly. This applies to your old appliance, and -at the end
of its service life- for your new appliance as well.
Warning! Before disposing of old appliances make them inoperable. Remove plug from mains, sever the power cable, remove or
destroy any snap or latch closures. This eliminates the danger that playing children lock themselves into the appliance (danger of
suffocation!) or place themselves into other life-endangering situations.
Disposal
The appliance may not be disposed of with domestic waste or bulky refuse. The refrigerating circuit may not be damaged. Information concern-
ing collection schedules or locations can be obtained from the disposal authorities or town hall.
The symbol on
the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be hand-
ed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappro-
priate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
POSITION
Place the freezer horizontally on a firm surface, resting on all four plastic feet. Use a wooden block or similar object to compensate for any bumps/holes in
the surface. The room should be dry and adequately ventilated. Temperatures of the external environment have an impact on the energy consump-
tion of the device. Therefore: do not put the device to a place exposed to sunshine ore besides a radiator or oven, put it to a place where the
temperature of the environment corresponds to the climatic classification for which the device was designed.
Climatic classification
Ambient temperature limits
SN
N
ST
T
If the freezer has been handled standing on end it should be allowed to stand in normal position
for about 12 hours before switching it on. Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a breakdown.
ELECTRICAL REQUIREMENTS.
Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate, located inside the lid.
Warning: This appliance must be earthed.
this appliance complies with the following EC Directives:
- 73/23/EEC of 19. 02. 1973 - Low-Voltage Directive
- 89/336/EEC of 03. 05. 1989 (including Amendment Directive 92/31/EEC - EMC Directive.
Some of the models are not available in all countries. Testing has been carried out in accordance with ISO 5155 regarding the determination of
freezer capacity, energy consumption and hold-overtime. Information for test institute: A plan of the positioning of test packages may be obtained
directly from the manufacturer.
SWITCHING ON FREEZER BOX
Close top of freezer box installed in accordance with specifications down then connect equipment with mains as
specified above. At this time electric components inside will be energised. Adjust knob of temperature regulator
in centre with rotating clockwise. After a weak clicking cooling compressor will start together with slight vibration
and noise.
1. Knob of temperature regulator
from +10°C to +32°C
from +16°C to +32°C
from +18°C to +38°C
from +18°C to +43°C
1