Bosch SG250 Manuel d'utilisation et de sécurité - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et de sécurité pour {nom_de_la_catégorie} Bosch SG250. Bosch SG250 32 pages.
Également pour Bosch SG250 : Manuel d'utilisation et de sécurité (33 pages)

Bosch SG250 Manuel d'utilisation et de sécurité
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the power tool's operation. If damaged,
have the power tool repaired before use.
Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring or its own cord.
Do not drill, fasten or break into existing
walls or other blind areas where electrical
wiring may exist.
Always wear safety goggles or eye
protection when using this tool.
Secure the material being fastened. Never
hold it in your hand or across legs.
Never leave the trigger locked "ON".
Before plugging the tool in, check that the
trigger lock is "OFF".
Position the cord clear of rotating driver.
Do not wrap the cord around your arm or
wrist.
Be aware of the location and setting of the
switch "Lock-ON" button.
Keep cutting tools sharp and clean.
Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Have your power tool serviced by a qualified
repair person using only identical
replacement parts.
Safety Rules for Screwsguns
Be prepared for a strong reaction torque
when "seating" or removing a screw.
Do not use dull or damaged bits and
accessories.
Check to see that keys and adjusting
wrenches are removed from the driver
before switching the tool "ON".
Do not run the tool while carrying it at
your side.
Never place any part of your body in a
pinch point area.
Service