Atid AT287-UHF Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Atid AT287-UHF. Atid AT287-UHF 13 pages. Bluetooth rfid reader (6c)

Imprimer la page



NOTE:

Battery life is largely affected from the user using method and surrounding environments.

800mA battery is usually needs 4 ~ 12 hours to get charged completely.

2. Setting product operation mode

When you use only this product, it will be working simply, unable to take of the data,

And you can get only tag's UID data

2.1 Switching the data transfer mode

This device has three different type of data operation mode USB, Bluetooth.

Every time when you press the BT/USB KEY, the USB and Bluetooth operation mode is changed



NOTE:

Please check the SDK manual and Demo program, if you have question which is relating

Command

2.2 USB Mode settings and connection

You need to use additional program and device driver for using USB MODE

Please contact the customer support center or your place of purchase.

 USB Connection

○ 1 Please set up the AT287-UHF's USB driver after set up the 'USB to serial driver.exe' in PC

○ 2 Press the BT/USB KEY then set up the USB MODE

○ 3 Please connect the Sync cable to sync/Power connector which is bottom on the device

And the opposite one should connect PC's USB connector

○ 4 If the PC is recognized USB; please check the COM Port by equipment operator.

○ 5

After running a dedicated PC Demo program, and set up the COM port, please press the Connect

button for performing the task

2.3 Bluetooth Mode settings and connection

In order to use Bluetooth Mode as a separate, dedicated Program and Bluetooth Dongle for PC

or a separate Bluetooth-enabled Android, Windows Base, the Device is required

Please contact the customer support center or your place of purchase.

Other Mobile Device (PDA or smart phone) associated with the use of a Bluetooth; please see

the user manual for details

 Connecting the Bluetooth in the PC(Windows )

① If the PC does not support the Bluetooth, please connect the Bluetooth Dongle to

PC first then set up the driver.

② If the PC can support the Bluetooth, please check to set up well or the device is

performing well

③ Please power on and press the BT/USB key for set up the Bluetooth Mode

④ After running the Bluetooth programming the Windows Control panel, Device

discovery (Device Search) will proceed

⑤ Device Discovery (Device Search) will proceed.

AT287-UHF User Guide