Bosch Instructions for Use Manuel d'installation et d'utilisation - Page 24

Included with the

appliance

Removing the transport

safety bolts

Positioning and

levelling

Number

Covers for openings left after removing the transport bolts.

24-40 mm dia. hose clamp for connection to a siphon.

On the back of the washer dryer:

– Water drain hose

– Water supply hose

– Mains cable with plug

– Instruction manual and booklet containing after-sales service

addresses

Moisture may remain in the drum following the final inspection which

every washer-dryer undergoes before leaving the factory.

Unscrew all four screws

using the spanner

supplied.

Insert the protective

covers.

– Appliance stability is essential to ensure that the washer dryer does not

"creep" during spin cycles.

– The installation area must be firm, clean and level.

– Parquet floors and soft floor coverings, e.g. carpets or foam-backed

floor coverings, are unsuitable.

Description

Spanner

Door template

Door hinges with screws

Remove all 4 transport safety bolts

completely and take the mains cable out of

the retainers.

– Before using the appliance for the first

time, ensure that all transport safety bolts

have been removed and kept safe for any

subsequent transport.

– If you need to transport the appliance at a

later date, always refit the transport safety

bolts to prevent damage to the washer-

dryer.