Dreamline ENIGMA Instructions d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Dreamline ENIGMA. Dreamline ENIGMA 12 pages. Shower door
Également pour Dreamline ENIGMA : Manuel d'installation (12 pages)

Imprimer la page

9. Place the Guide block (12) on the floor

and parallel it to the Stationary glass (02).

It should not pass beyond the vertical

edge of the glass.

Take a measurement to ensure the

distance between the front line of the

glass and the center line of the Guide

block is 2 3/16".

Hold it firmly and mark the drilling hole

on the floor. Remove the Guide block,

drill the hole using Ø5/16" drill bit; insert

the Small anchor Ø5/16" in and then

secure the Guide block to the floor with

the Countersunk screw ST4.2×30 (16).

See Fig. 11 for details.

10. Attach two top Rollers (04) to the

Glass door (05).

Suspend the door by hanging the

Rollers onto the Guide rail (03) and

slide the bottom edge of the Glass

door into the groove of the Guide

block (12).

Then mount two lower Rollers (04)

onto the door to secure the door to the

Guide rail.

See Fig. 12 for details.

Rev 2.1

Fig

. 10

. 11