ATIGO A1001 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ATIGO A1001. ATIGO A1001 8 pages. 2-wire audio receiver

Operation Instructions

When a visitor pushes the call button from the

entry panel, the audio receiver will start

ringing. To answer the call up the receptor to

talk. Press the unlock button to release the

primary door. If the call comes from a

secondary entrance, press unlock 2

Check with your installer if the lock is electric

and if it can connect to the system.

DIP1 switches 1 to 5 are used to set the user

code according to below table. The possible

values are between 1 and 32 different codes

for 32 apartments.

While in standby, pickup the handset and

press the call button to activate the intercom

A doorbell button can be connected to the

receiver. Visitors can ring doorbell when they

are at the door.

button.

On the Atigo system every apartment must

have a unique identification value, or user

code.

DIP1 switch 6 is used to match a video

monitor when the audio handset is used on a

video system.