Bosch 900947 Instructions pour l'utilisation et l'assemblage - Page 13
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisation et l'assemblage pour {nom_de_la_catégorie} Bosch 900947. Bosch 900947 48 pages. Clothes dryer
![Bosch 900947 Instructions pour l'utilisation et l'assemblage](/uploads/products/server2/1419315/1419315.jpg)
▶
Replace the corresponding accessories
before operating the device.
→
"Accessories ", page 27
Scope of delivery Description
4.3 Requirements for the
installation site
CAUTION!
The device was subjected to a function
test before it left the factory and may
contain residual water. If the device is
tilted over 40 °, this residual water can
run out.
Carefully tilt the device. If the
▶
device is set up in areas with a risk of
frost or outdoors, frozen residual
water can damage the device and
frozen hoses can tear or burst.
▶ Do not set up and operate the device
in areas where there is a risk of frost
or outdoors.
If the device is operated immediately
after transport, the coolant contained
in the device can damage the device.
Allow the device to rest for two
▶
hours immediately after transport,
before using it.
Clothes dryer
Accompanying documents
Set up and connect
Installation site
On the floor
the
In a washing
Dry column
de
conditions
Place the device
in a clean, level
stand on a solid
surface.
Turn the device off
judge
→ Page 14
.
This device only
with the origina-
len connection
set of drying
manufacturer in
a washing trough
open pillar
put.
This device only
on a washing
machine from
same manufacturer
ask. the
Depth and breadth
this device
have to go with the
Dimensions
the washing machine
machine match
voices.
The washing trough
pillar not
on a pedestal
put.
13th