Community R.35-3896 Manuel d'installation et d'utilisation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Community R.35-3896. Community R.35-3896 17 pages. R series
Également pour Community R.35-3896 : Manuel d'installation et d'utilisation (13 pages)
Imprimer la page
SPECIFICATIONS
MODEL
Loudspeaker Type
Driver Complement
Coverage Pattern (H x V)
Operating Range (-10 dB)
Frequency Response
(-3 dB)
Input Ratings
Music Sensitivity 1W/1m
(free space SPL)
Speech range
Voice Sensitivity 1W/1m
(free space SPL)
Speech range
Maximum SPL
Continuous / Peak
Nominal,
Minimal Impedance
Crossover Frequency
Recommended
High Pass Filter:
Horn Rotatable
Input Connection
Controls
Rigging Provisions
Construction
Finish
Environmental
Dimensions
H x W x D
Net Weight with yoke
Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.
Note: Every effort has been made to insure that the information contained in this manual was complete and accurate at the time of printing.
However, due to ongoing technical advances, changes or modifications may have occurred that are not covered in this manual. Visit
Community at http://www.communitypro.com for the latest version of this manual and the most recent product information.
Page 12
R.15COAX
2 way, full range, coaxial
LF: 1 x 6.5" carbon ring cone,
HF: 1 x 1.25" exit compression driver
100° x 100°
90 Hz - 16 kHz
125 Hz - 12.5 kHz
150W RMS,300W Program, 35 volts
RMS, 69 volts momentary peak
94dB (125 Hz–10 kHz)
92dB (250 Hz-4 kHz)
95dB (125 Hz–10 kHz)
93dB (250 Hz-4 kHz)
Music 116dB (122dB peak)
Speech 117dB (123dB peak)
8 Ohms, 4.2 Ohms @ 12.5 kHz
1.3 kHz
90Hz 24dB/oct
n/a
NL4 Speakon-type connector and
2-position terminal strip for low
impedance or constant voltage
operation
5-position wattage / low impedance
selector switch
Music / speech switch
Two 8mm rigging points,
Zinc-rich epoxy dual-layer powder-
coated yoke, Included integral safety
cable mounting point
9" x 10.2" x 10.2"
(229 x 259 x 259 mm)
17 lbs (7.7 kg)
Installation and Operation Manual
R.35COAX
2 way, full range, coaxial
LF: 1 x 10" cone,
HF: 1 x 1.25" exit compression driver
90° x 90°
70 Hz - 16 kHz
110 Hz - 12.5 kHz
200W RMS, 400W Program, 40 volts
RMS, 80 volts momentary peak
97dB (125 Hz–10 kHz)
97dB (250 Hz–4 kHz)
99dB (125 Hz–10 kHz)
99dB (250 Hz–4 kHz)
Music 120dB (126dB peak)
Speech 122dB (128dB peak)
Music 8 Ohms, 5.9 Ohms @ 200 Hz
Speech 8 Ohms, 5.5 Ohms @ 5 kHz
1.3 kHz
70Hz 24dB/oct
n/a
NL4 Speakon-type connector for
low impedance operation only;
and 7-position terminal strip for
low impedance or constant voltage
operation
Music / speech switch,
70V/ 100V operation jumper
Two 8mm rigging points,
Zinc-rich epoxy dual-layer powder-
coated yoke, Included integral safety
cable mounting point
ABS plastic, matte finish, paintable
Light Grey, Black or White (standard)
RAL # 7038, 9004 or 9003
IP55W per IEC 529 at 5° down-tilt
Designed to MIL-STD-810G
11" x 13" x 13.5"
(279 x 330 x 343 mm)
26 lbs (11.8 kg)
R.35-3896
3 way, full range, triaxial
LF: 1 x 8" cone,
MR: 2 x 2.35" MultiSource
Waveguide compression
HF: 1 x 1" exit compression driver
90° x 60°
80 Hz - 16 kHz
120 Hz to 12.5 kHz
400W RMS, 800W Program, 56 volts
RMS, 113 volts momentary peak
98dB (125 Hz–10 kHz)
97dB (250 Hz–4 kHz)
100dB (125 Hz–10 kHz)
99dB (250 Hz–4 kHz)
Music 124dB (130dB peak)
Speech 126dB (132dB peak)
Music 8 Ohms, 6 Ohms @ 9 kHz
Speech 8 Ohms, 4.1 Ohms @ 8 kHz
850 Hz, 2.7 kHz
80Hz 24dB/oct
No
NL4 Speakon-type connector for
low impedance operation only;
and 7-position terminal strip for
low impedance or constant voltage
operation
Music / speech switch,
70V/ 100V operation jumper
Two 8mm rigging points,
Zinc-rich epoxy dual-layer powder-
coated yoke, Included integral safety
cable mounting point
11" x 13" x 13.5"
(279 x 330 x 343 mm)
34 lbs (15.4 kg)
R.15COAX, R.35COAX, R.35-3896