Bosch Programme Table Manuel d'installation et d'utilisation - Page 16

End of the programme

Rinse hold

Childproof lock

The washing and drying programmes are ended automatically.

appears on the display panel.

Turn the programme selector to Off.

Remove the washing from the drum.

Leave the door open to allow the inside of the washer-dryer to dry out.

Turn off the tap (not necessary on models with Aqua-Stop).

If the spin function was deactivated at the start of the wash cycle,

$ (no final spin = laundry remains in last rinsing water), the washing

programme is automatically stopped after the final rinse. The display

panel shows

In order to Drain the rinsing water and, if required, spin the laundry:

Press the B (Spin) button repeatedly until the required spin speed is

set. The water is Drained and the washer-dryer spins the laundry. The

programme is completed when

The maximum spin speed depends on the selected wash programme.

If you do not wish to spin the laundry:

Press the B (Spin) button (remaining time for Draining is displayed).

The water is Drained, but the washer-dryer does not spin the laundry.

The programme is complete when

panel.

Set the programme selector to Off.

Remove the laundry.

Leave the door open to allow the inside of the washer-dryer to dry out.

Turn off the tap (not necessary on models with Aqua-Stop).

For preventing the washer-dryer functions that you have set from being

changed inadvertently.

Activate/Deactivate: Press the option and set buttons at the same time

to activate or deactivate the Childproof lock. When the childproof lock is

activated, @ lights up on the display.

alternating with

appears in the display field.

appears on the display