Bosch WQG233D20 Instructions pour l'utilisation et l'assemblage - Page 39
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisation et l'assemblage pour {nom_de_la_catégorie} Bosch WQG233D20. Bosch WQG233D20 48 pages. Clothes dryer
Imprimer la page
disturbance
Device paused, but
the drum turns
himself.
Wrinkling.
and program
Broken.
Program starts
not.
Program duration change
changes during drying.
Cause and troubleshooting
Cooling process active.
No mistake - no action required.
▶
Load is too high.
Note the maximum load of the
▶
→ "Programs ", page 24 .
Laundry has been in the drum for too long after drying.
Take the laundry out of the drum as soon as it is dry.
1.
Spread out the laundry to cool.
2.
Unsuitable program set for the type of fabric.
Set the appropriate program for the type of fabric.
▶
→ "Programs ", page 24
Easy-care items dried too long.
→
▶
"Changing the dryness level ", page 23 .
→
▶
"Adjusting the dryness level ", page 23 .
Anti-crease not activated.
Activate the anti-crease.
▶
→ "Keys ", page 21
The condensation container is full.
→ "Empty the condensate container ", page 32 .
1.
→ "Push in the condensate container ", page 32 .
2.
→ "Start the program ", page 28 .
3.
Foreign matter is in the base unit
→ "Open the bottom unit ", page 34 .
1.
Remove the existing foreign objects.
2.
→ "Closing the base unit ", page 36 .
3.
Child lock is activated.
→ "Deactivating childproof lock ", page 33
▶
Start / reload was not pressed.
Press Start / reload.
▶
No program set.
→ "Setting a program ", page 28 .
1.
→ "Start the program ", page 28 .
2.
The program sequence is electronically optimized. This can
lead to a change in the program duration.
No mistake - no action required.
▶
Troubleshooting de
39