Bosch WQG233D20 Instructions pour l'utilisation et l'assemblage - Page 42
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisation et l'assemblage pour {nom_de_la_catégorie} Bosch WQG233D20. Bosch WQG233D20 48 pages. Clothes dryer
Imprimer la page
de
Transport, storage and disposal
1 7 Transport,
Storage and disposal
E.
F ind out how to use your device here
prepare for transport and storage.
You will also learn how to dispose of
old devices.
17.1 Preparing the device for
transport
CAUTION!
If the device is operated immediately
after transport, the coolant contained
in the device can damage the device.
Allow the device to rest for two
▶
hours immediately after transport,
before using it.
Tip: The device may contain residual
water and drip during transport.
Transport the device in an upright
position.
requirements
¡ The condensed water container is
empties. Empty the condensate
container → Page 32
¡ The device is switched on.
→
"Switch on the device ", page 28
Set any program → Page 28 .
1.
Start the program → Page 28 and
2.
wait 5 minutes.
a The condensed water is
pumps.
Switch off the device.
3.
→
"Switch off the device ", page 29
Empty the condensed water
4th
container → Page 32 .
Push in the condensed water
5.
container → Page 32 .
42
Disconnect the device's power plug
6th
from the power supply.
a The device is ready for transport.
17.2 Dispose of the old device
Valuable raw materials can be
reused through environmentally
friendly disposal.
WARNING
Risk of damage to health! Children can
lock themselves in the device and
endanger their lives.
▶ Do not place the appliance behind a
door that blocks or prevents the
appliance door from opening.
▶
In the case of disused appliances, pull
out the plug of the mains connection
cable, then cut through the mains
connection cable and destroy the lock
on the appliance door to such an extent
that the appliance door no longer
closes.
WARNING
Fire hazard!
The refrigerant R290 in this device is
environmentally friendly but
flammable and can ignite if the device
is not properly disposed of.
Dispose of the device properly.
▶
Do not damage the pipes of the
▶
refrigerant circuit.
Unplug the power cord from
1.
the power cord.
Cut through the power cord.
2.
Dispose of the device in an environmentally friendly
3.
manner.
You can obtain information about
current disposal routes from your
specialist dealer and from your local
authority or city administration.