Carnival King 382DFC1800 Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Carnival King 382DFC1800. Carnival King 382DFC1800 5 pages. Funnel cake fryers
Imprimer la page
Parts Key
Parts Key for DFC1800 & DFC4400 Funnel Cake / Donut Fryer
Part Name
Heating Element; 1800W, 120V (DFC1800)
Heating Element; 4400W, 240V (DFC4400)
Thermostat
On/Off Switch
Thermostat Knob
Mesh Tray
Bottom Grate
Rubber Foot
Troubleshooting
Problem
Indicator light will not turn on and
unit will not heat.
Heating indicator is not on, the
temperature is not increasing.
Power indicator is on but the desired
temperature is not reached.
Temperature control is normal but
indicator is not on.
Temperature indicator is on, but
heater tube is not hot.
Temperature can not be controlled.
Troubles listed are for reference. If any fault occurs, please discontinue use. Do not attempt to repair
yourself. This will void the warranty.
6 Month Replacement Warranty
(Effective from date of purchase)
This warranty is not effective if damage occurs because of accident, carelessness, improper installation, lack of
proper set-up, supervision when required, or if the equipment is installed or operated in any manner contrary to the
installation and operating instructions. Work performed by unauthorized personnel or unauthorized service agencies
voids this Warranty. This warranty does not apply to any warranty claims made on products sold or used outside of
the United States. Residential use voids this warranty.
www.CarnivalKingSupplies.com
FUNNEL CAKE FRYER Manual
Causes
Plug not properly inserted.
Micro-switch not closed.
Electric heater tubes is not properly
connected.
Heater is defective.
Temperature controller is burned out.
Indicator light is burned out.
Temperature limiter has tripped.
Temperature limiter is out of order.
.
| | | | | [email protected]
Replacement Part Item #
382DFC18ELMT
382DFC44ELMT
382DFCTHRM
382DFCSWITCH
382DFCKNOB
382DFCTRAY
382DFCGRATE
382DFCFEET
Solution
Reinsert plug.
Adjust the limit distance of mircro-
switch.
Tighten both sides of electric heater.
Change electric heating tube.
Change temperature.
Change temperature controller.
Reset overheating protecting button
by hand on bottom of electrical box.
Change temperature limiter.
5