Bosch WTA35 Series Instructions de réparation - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions de réparation pour {nom_de_la_catégorie} Bosch WTA35 Series. Bosch WTA35 Series 15 pages. Electric vented dryer, electric condensation dryer
Également pour Bosch WTA35 Series : Manuel d'utilisation (44 pages), Manuel d'utilisation et d'entretien (24 pages)
Imprimer la page
TUMBLE DRYER
Signal
Start time*
*
3.
Programme progress indicator
Dampness in the washing is continuously checked by the electronic sensor system.
The programme status is displayed by an LED.
III.
DESCRIPTION OF FUNCTION / TECHNICAL INFORMATION
1.
General information
The design is based on a fully electronic solution. All control functions are combined on the
power module. The selected drying setting is determined by a conductivity measurement.
The conductivity measurement of the washing is converted to a voltage measurement.
Sliding contact
driver electrode
r120085e -15/2
04.99
Button pressed (LED on) – signal emitted in the "anti-creasing"
phase.
Changing the volume – hold down the button, the signal changes.
When the button is released, the volume has been changed
and stored.
Switching off the signal – press the button again (LED off).
The start time can be specified from 1–19 hours. The running
time is indicated by a flashing dot in the 7-segment display.
The "anti-creasing" phase is extended to 8 hours.
If the Start button is pressed, the appliance starts immediately.
If the door is opened during the preselected time,
the Start time LED flashes, press the Start time button again –
the LED switches to a steady light.
Optional (WTA3480; WTA3500)
Sliding contact
earth
Washing
resistance
Sliding contact
driver electrode
Insulation
Slipring
Drum wall
+5 V
Input
Micro-
controller