Andersons Model2000 Manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Andersons Model2000. Andersons Model2000 8 pages. Professional rotary spreader

Imprimer la page

Assembly

Using a grease gun, lubricate the grease fittings

on the axle bearing housings and gear carrier.

Apply a small amount of grease to the gear

teeth. Install the two gearbox cover halves and secure

with the three retainer clips. Insert the screen inside the

hopper and secure it with factory installed clips.

Maintenance

1) Empty the spreader after each use. Return the unused

material to its original container and seal to prevent

moisture-caused clumping.

2) Wash the spreader thoroughly and dry in sunny or

heated area. Wipe or blow off excess water to prevent

corrosion. Clean all residue from rotor plate.

3) Periodically grease the axle bearing housings as indi-

cated in assembly step #7.

4) Periodically oil the pivot points on the main shutoff/rate

control linkage, as well as the spring inside the rate

control housing.

continued

5) Periodically clean and inspect the gears by removing

6) Maintain tire pressure at 20 psi maximum.

7) If the axle requires disassembly, be sure to reassemble

Grease Fittings

the gearbox cover halves. Apply a small amount of

grease to the gear teeth for lubrication. Apply grease at

the gear carrier fittings indicated in assembly step #7.

Be sure to reinstall gearbox cover halves prior to use.

it so the drive wheel attaches on the right side.

Incorrect spread patterns will result if the rotor plate

does not rotate in a counter-clockwise direction.

Grease Fittings