Dreamline ENIGMA-X Manuel d'instructions d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Dreamline ENIGMA-X. Dreamline ENIGMA-X 14 pages. Shower door & tub door

Imprimer la page

Preparation

1. After opening all boxes and packages, read this introduction carefully. Check that all of

the needed parts are included in the package, by marking all the components on the

"Detailed Diagram of Shower Door Components". Examine boxes and packages for

shipping damage. If the unit has been damaged, has a finishing defect, or has missing

parts, please contact our customer support department within 3 business days of the

delivery date. Please note that DreamLine

or missing parts free of charge after 3 business days or if the product has been

installed. Feel free to contact DreamLine

2. Please note that you should consult your local building codes on questions on

installation compliance standards. Building and plumbing codes vary by location,

and DreamLine is not responsible for code compliance standards for your project.

3. Please ensure that prior to the installation the installation surface is leveled and solid. Also

make sure the walls are at right angles. While some adjustment in leveling of the door is

possible, irregular installation surface level or improper angle of side walls will result in

serious problems for your installation. Please note that there are some adjustments and

drilling might be necessary during the installation process.

4. This unit has to be installed against a finished floor and walls.

5. Please, NOTE! This door does not have out-of-plumb adjustment. Make sure your

walls are at right angles.

6. This door requires a minimum 2

Please note that Step 6 calls for installation of the door to the wall using

anchors. However, the manufacturer strongly recommends installing these

heavy doors to the studs or to preinstalled 2x6 wood reinforcement behind

the wall and attaching the Wall brackets to it.

Attention:

This door is extremely heavy and requires professional

installation.

Instructions are given for the shower door installation. Please, follow the

same instructions to install the tub door.

Tape

Caulk

Measure

Level

Rev 1.1

will not replace any damaged products

if you have any questions.

" wide threshold, base or installation space.

Tools Required

Phillips

Pencil

Screwdriver

Electric

Caulk

Gun

Drill

Drill bit

(Ø=3/8")

(Ø=5/16")

Miter saw or Hacksaw

Hammer

Drill bit

(Ø=1/8")