Andersson IDA 2.5 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Andersson IDA 2.5. Andersson IDA 2.5 6 pages. Indoor antenna
Également pour Andersson IDA 2.5 : Manuel de l'utilisateur (20 pages)
Imprimer la page
Instructions
Æ Do not use during thunder storms - turn off the power.
Æ Turn off the power when it is not being used.
Æ If you have trouble receiving a good signal, reposition the
antenna. If you still cannot get a clear picture, it is pos-
sible that a roof top antenna is required.
Installation
Connect the antenna's built-in coaxial antenna cable to your
set-top box or TV. If the signal is weak, you can use an am-
plifier: Connect the antenna's built-in cable to the input jack
of the amplifier. Connect the amplifier's cable to the antenna
input on the set top box or TV.
You can use the antenna with or without its amplifier, de-
pending on which connection gives you the best signal.
Using the amplifier provides the best performance in most
situations, so try using it first. If you notice that you have lost
channels that you normally receive, try connecting without
amplifier.
If additional power is required you can plug the power adap-
tor to the DC jack of the amplifier and connect it to an electri-
cal outlet.
IDA 2.5 Digital TV Antenna
Amplifier
Digital Terrestrial STB
Note: You can use the included velcro stickers to stick
the antenna on the wall or the TV
Specifications
Working Voltage
DC6V/50mA
Reception frequency
VHF 174-230 Mhz (channels 5-12)
UHF 470~862 Mhz (channels 21-69)
Impedance
75 Ohm
Contains
Indoor antenna, user manual, velcro stick-
ers, power adaptor, external amplifier
AC/DC
adaptor
TV