Andersson PCM 2.0 Manuel de l'utilisateur - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Andersson PCM 2.0. Andersson PCM 2.0 10 pages. Projector ceiling mount
Imprimer la page
This product is designed to mount video projector weighing up to 10kg to ceiling. Please read the entire
instruction sheet before you start installation and assembly.
Hardware Kit:
1. Ceiling plate
2. Projector plate
3. 15 cm Extension pipes
4. 8 cm Extension pipes
5. Projector arm
6. Rubber gasket
7. M6 screw
8. M4 screw
9. Adapter part A
Mount the projector
Common mounting
Fasten the projector arms
(5), using screws with
washer (17).
Special mounting: Toshiba projectors
1
Attach adapter part A
(9) to the projector using
M4 screws (8).
x1
x1
x1
x1
x3
x1
x4
x4
x2
Adjust the projector
arms to the same
height.
2
Fasten the projector
arms (5), using screws
with washer (17).
10. Adapter part B
11. M6 Washer
12. 5 mm Allen key
13. 4 mm Allen key
14. 6 mm Lag bolt
15. Concrete anchor
16. M6 washer
17. Screw with washer
Supplied parts are exclusive for use in this product.
Other parts are forbidden. If any parts are missing
or defect, please contact your retailer.
Ⅰ
Ⅱ
Ⅲ
Choose mode 1, 2 or 3
to adjust the projector
arm to the same height
from the surface of the
projector.
3
Converge the arms to the
centre and fix the arms to the
bottom of the projector plate
by using M6 screws (7), and
washers (11) and (16).
x3
x3
x1
x1
x3
x3
x6
x3
Converge the arms to the
centre and fix the arms to the
bottom of the projector plate
by using M6 screws (7), and
washers (11) and (16).
4
Fix the screws.