Dreamline UNIDOOR Instructions d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Dreamline UNIDOOR. Dreamline UNIDOOR 13 pages. Shower door

Imprimer la page

7. Apply clear silicone along the inner channel of

the Glass profile (10) and push the Stationary

glass (11) inside the channel.

NOTE: If you have difficulty sliding the Glass

profile over the Stationary glass, you can

slightly tap on the Glass profile with a rubber

hammer and a piece of wood.

See Fig. 8.1, Fig. 8.2 and Fig. 8.3 for details.

NEVER use the metal hammer or hit

the profile without the wood bumper.

8. Push the Glass profile (10) inside the Wall

profile (09).

See Fig. 8.4 for details.

NOTE: Please note that the hole in the

corner of the Glass panel should be at the

bottom, farther from the wall.

9. Press the Anti-Water strip (20) on the vertical

edge of the Stationary glass (11). Align the Stationary glass with the

Glass Door and then close the Glass door.

If needed adjust the position of the Stationary glass to make sure the

Anti-water strip (20) and the Glass door (1) work well.

See Fig. 9 for details.

Please note: The Stationary glass must be

leveled with the Glass door

10. Draw a line along the inner edge of the Wall

profile on the wall. Detach the Wall profile

from the Stationary glass and the Glass

profile assembly. Place the Wall profile to

the outlined position and mark the drilling

holes through the predrilled holes in the Wall

profile.

Now drill the holes using Ø 5/16" drill bit in

Rev 2.1

Stationary Glass Installation

Fig

. 8

Fig

. 9