ANDI WMA 7612 L Démontage

Parcourez en ligne ou téléchargez le pdf Démontage pour {nom_de_la_catégorie} ANDI WMA 7612 L. ANDI WMA 7612 L 14 pages.

ANDI - WMA 7612 L - DISASSEMBLY

1- TOP PLATE

• Remove the two screws that attach the top plate to the cabinet.

• Push the top plate back and then lift upwards and take it out.

2- REAR COVER

• Remove the five screws that attach the back cover to the cabinet.

• Lay the cover 90º to the cabinet and lift to remove.

3- FRONT DOOR

• Open the front door.

• Remove the two screws that secure the front door to the hinge. ( Figure 1a)

Front door

screw - b

Hinge screw-c

Figure 1a

3a- FRONT DOOR (New BIG DOOR)

The opening side of the big porthole can be changed. It might be wanted that the

180º opening big front door to be opened to right instead of left because of the

ergonomic loading demands where it is placed at home. Therefore instructions for

changing the opening side of the washing machine together with assemblying and

disassemblying instructions are explained below.

To change the opening side of the big porthole

• Detach the door hood from the front panel by taking out the cabinet hood

clamp.

• Detach the door lock from the front panel by unscrewing the two plastic

screws.

• Unscrew the two hinge bolts (M5x10) and take out the front door assembly

from the front panel.

• Unscrew the screw(4,2x9,5) which fixes the hinge support bracket to the front

panel.

• Unscrew the screws of the front panel and detach it from the cabinet.

• Secure the cables going to the door lock at the appropriate hole on the panel

support with a cable clamp by arranging its length (if we are to place the door

lock underneath the detergent dispenser, we should open the wrapping and

extend the cable or if we are to place the door lock underneath the timer, we

shold wrap the cable).

a – Door opening button