Carolina Cooker M110836 Manuel du propriétaire - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Carolina Cooker M110836. Carolina Cooker M110836 18 pages. Cast iron stove (double burner)

Imprimer la page

5.1.2 While Cooking

Never leave hot cooking liquids unattended.

Carefully remove food from the appliance to pre-

vent burns from hot cooking liquids.

Do not place an empty cooking container on a lit

burner. Empty aluminum cooking containers will

melt if placed over lit burner.

Do NOT move the appliance when in use.

Avoid bumping of or impact with the appliance

to prevent contact with hot surfaces, spillage or

splashing of hot cooking liquids.

5.1.3 After Cooking

Heated cooking liquids and equipment will remain

at temperatures capable of causing severe burns

and injuries long after cooking has ended.

Do not leave the appliance unattended.

The valve on the LP cylinder must be closed when

not in use.

5.2 Connecting the LP Cylinder

5.2.1 Safety Instructions

SAFETY INSTRUCTIONS

• Do not connect this appliance to any other fuel supply

source, such as natural gas.

• If the regulator is not working correctly, do not attempt

to adjust or repair it.

• Never use an LP cylinder if it shows signs of dents,

gouges, bulges, fire damage, corrosion, leakage,

excessive rust, or other forms of visual external dam

age. This type of damage may be hazardous and

should be checked by an LP service technician.

• Route the gas supply hose away from any hot surface

on the appliance stand.

Carolina Cooker®

844-478-4334

5.2.2 Connecting Instructions

Make sure both shutoff valves are CLOSED,

by turning them clockwise, prior to connecting

the regulator and hose assembly.

2. Make sure the LP cylinder is upright and the valve is

closed by turning the knob clockwise.

3. Attach a pressure regulator and hose assembly

(customer supplied). Part number 91051 is a

recommended regulator and hose assembly.

NOTICE

connection, hold brass hex nut with one wrench while

tightening regulator hose assembly fitting with the

other wrench. Do not tighten the connection using a

single wrench.

To prevent damage to the shut-off

valve when tightening the

Model M110836

January 2021