Bosch WTY877690W Manuel d'installation et d'utilisation - Page 37

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Bosch WTY877690W. Bosch WTY877690W 44 pages.

Imprimer la page

Faults

Laundry is not dried cor-

rectly or is still too damp.

Drying time too long?

Displayed drying time

changes during drying

process.

Display panel goes off

and Start button flashes.

Residual water in the

condensation container

despite the dryer being

connected to the con-

densation drain*.

Humidity in the room

increases.

Power cut.

* depending on the model

Cause/remedy

After the end of the program, warm laundry feels damper than it actually is.

■

Spread the laundry out and allow the heat to disperse.

Finely adjust the dryness level – this extends the drying time but does not

■

increase the temperature. Your laundry will become drier ~ Page 26.

Select a program with a longer drying time or increase the drying level. This

■

does not increase the temperature.

Select a timed program for subsequent drying of laundry that is still damp

■

~ Page 25.

If you have exceeded the maximum load for the program, the laundry may

■

not be dried properly.

Clean the moisture sensor in the drum. The sensor may become covered by

■

a fine layer of limescale or residues of detergents and care products which

then impair its function. Your laundry is not being dried correctly

~ Page 34.

Drying has been interrupted as a result of a power cut, because the conden-

■

sate container is full or because the maximum drying time has been

exceeded.

Note: