Comnet CLFE4+2SMSPOEC Manuel d'installation et d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Comnet CLFE4+2SMSPOEC. Comnet CLFE4+2SMSPOEC 7 pages. 10/100tx drop/insert/repeat 4tx/2ex self-managed switch with poe+
Imprimer la page
INSTALLATION AND OPERATION MANUAL
INSTALLATION CONSIDERATIONS
These units are supplied as Standalone/Rack mounted module. Units
should be installed in dry locations protected from extremes of
temperature and humidity.
Unit is to be used with a Listed Class 2 power supply. Although
WARNING:
the units may be mounted inside a ComNet rack the PoE models cannot be
powered from the built-in rack PSU; they must be powered by an external
48-56VDC PSU.
IMPORTANT SAFEGUARDS:
- If installed in a closed or multi-unit rack
A) Elevated Operating Ambient
assembly, the operating ambient temperature of the rack environment
may be greater than room ambient. Therefore, consideration should be
given to installing the equipment in an environment compatible with
the maximum ambient temperature (T
- Installation of the equipment in a rack should be such
B) Reduced Air Flow
that the amount of air flow required for safe operation of the equipment
is not compromised.
3 CORPORATE DRIVE
8 TURNBERRY PARK ROAD
TECH SUPPORT: 1.888.678.9427
© 2016 Communication Networks. All Rights Reserved. "ComNet," the "ComNet Logo," "CopperLine," and the "CopperLine Logo" are registered trademarks of Communication Networks.
) specified by the manufacturer.
ma
|
DANBURY, CONNECTICUT 06810
|
|
|
GILDERSOME
MORLEY
LEEDS, UK LS27 7LE
FIGURE A
Dimensions are for a ComFit module
|
|
|
USA
T: 203.796.5300
F: 203.796.5303
|
T: +44 (0)113 307 6400
CLFE4+2SMS[POE](C,U) SERIES
|
|
TECH SUPPORT: 1.888.678.9427
|
|
F: +44 (0)113 253 7462
INS_CLFE4+2SMS[POE](C,U)_REV– 10/27/11 PAGE 7