Caroma 687042 Instructions d'installation

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Caroma 687042. Caroma 687042 2 pages. Inlet valve

�

��

� ��

IMPORTANT:-

It is critical the 31mm minimum

air-separation from the top of the overflow to the

critical level mark on the inlet valve is maintained.

�

Insert Quietflow valve into cistern & secure in

place using nut provided.

�

��

� ��

��

Using a ruler, measure the distance from the

base of the cistern to the WL mark on the back

of the cistern.

�

Flush the water supply line before connecting to

stop cock & turn mains water on. Check water

level height is correct and that there are no

leaks.

This Inlet Valve must be installed in accordance with AS/NZS 3500.1

�

��

Remove clip on

Slide valve body

Quietflow valve and

up/down until the WL

twist body to release

mark on valve body

from it's current set

corresponds to the

height.

height measured in

step 1.

�

For further water level adjustment, ensure mains water is turned off.

Repeat steps 2-4 until the desired water level is achieved.

Installation Instructions

�

��

Twist & lock valve

body back into place

before replacing clip.