Comnet RELIANCE RLGE2FE16R Manuel de démarrage rapide - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Comnet RELIANCE RLGE2FE16R. Comnet RELIANCE RLGE2FE16R 18 pages. Substation-rated, enhanced security scada-aware ethernet layer 2 managed switch/layer 3 router with optional 2g/3g & 4g lte cellular radio link, enhanced network security, terminal server, poe+, and 100fx sfp ports
Imprimer la page
QUICK START GUIDE
Logical Structure
Distance kept for natural air flow
Proper installation depends on natural air flow for cooling. You must maintain a 10cm distance
above and below the ComNet switch for proper air flow.
Grounding
To install the grounding wire:
» Prepare a minimum 10 American Wire Gauge (AWG) grounding wire terminated by a crimped
two-hole lug. Use a suitable crimping tool to fasten the lug securely to the wire. Adhere to your
company's policy as to the wire gauge and the number of crimps on the lug.
» Apply some anti-oxidant onto the metal surface.
» Mount the lug on the grounding posts, replace the spring-washers and fasten the bolts. Avoid
using excessive torque.
CAUTION – Do not remove the earth connection unless all power supply connections are
disconnected.
DANGER – Before connecting power to the platform, make sure that the grounding posts are
firmly connected to a reliable ground, as described below.
Connecting to a Power Source
CAUTION – Please refer to the RLGE2FE16R installation guide for complete installation
instructions.
Wiring DC Input voltage feed
Input voltage can be either AC or DC depending on the specific module you purchased. Please
TECH SUPPORT: 1.888.678.9427
RLGE2FE16R
QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 7