Drehmo i-matic Manuel d'instruction - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Drehmo i-matic. Drehmo i-matic 20 pages. Electrical actuator with integral controls
Également pour Drehmo i-matic : Manuel d'installation et d'utilisation (18 pages)
Imprimer la page- 1. Connection on Matic C Base Plate DMC - 02 (Since Hw Rev. 5)
- 2. Connection on I-Matic Interface Unit DIM - 09 (Devicenet)
- 3. Connection on Matic C Display Unit DMC - 30 (Lcd Display Unit)
- 4. Connection on I-Matic Display Unit DIM - 02 (Ir / Irii)
- 5. Connection on I-Matic Interface Unit DIM - 17 (Modbus Loop)
3.4 SER04 adaptor
The SER04 adaptor enables serial access by means of a 10 pole female reverse polarity
protected connector. By means of an integrated push button, a reset of the attached
electronic unit can be forced. Two DIL-switches S1 and S2 are available for different
configuration of functionality. The settings of these switches are explained in detail in the
documentation of the connected electronic.
3.4.1 Connection on i-matic interface unit DiM - 17 (modbus loop)
The following picture shows the position of the interface connector for the SER04 adaptor on
the DiM - 17 unit.
DREHMO
Instruction manual for USB adaptor kit
page 18 of 20