Drehmo i-matic Manuel d'installation et d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Drehmo i-matic. Drehmo i-matic 18 pages. Electrical actuator with integral controls
Également pour Drehmo i-matic : Manuel d'instruction (20 pages)

Imprimer la page

Supplement operating manual for DREHMO i-Matic actuators with integrated

2.5 Electrical connection

2.5.1 Actuators i-Matic for normal operation – DiM-X0X

2.5.1.1

Compact plug assembly

The electrical connection is done on the wiring board DiM-19 which is assembled on a

mounting plate in the compact plug housing. As an example for explanation, the cable

assembly for i-Matic with redundant field bus and optional two analogue and four digital

process inputs as inner parts of the compact plug is given below.

Strain relieves incoming, outgoing bus and

optional process inputs are independently

switchable to ground (switches on the front

side)

(1)

Optional: external 24 VDC supply of i-Matic unit (input) with tolerance +10%, -5%

and less than 500mA load.

Optional: auxiliary 24 VDC supply (output) for external use allows 60mA load.

Wenden, 21.03.12

Prepared by: Ste

MODBUS fieldbus interface

Mounting plate for power connector

and wiring board (backside view)

Power connector wire size 0.5 to 2.5

mm². Standard: cage clamp

Optional: screwing terminals

Various screwing terminals

depending on ordered options:

terminal size: AWG 16..26

solid wire: 0.14 to 1.5 mm²

flexible wire: 0.14 to 1 mm²

Two optional analogue inputs

Four optional digital inputs

Channel 2 incoming and outgoing

RTS signals

Optional 24V external power

Channel 1 incoming and outgoing

Page 12 of 18

(1)